Amacandelo e-diamond saw blade kunye namasuntswana angundoqo

Izahlulo zesarha yedayimane yesarha kunye namasuntswana angundoqo Umfanekiso ofakiweyo

Ukusika okumanzi okanye okomileyo

Diameter: 4″-12″

Izahlulo zesaha yedayimani

amacandelo amasuntswana angundoqo wedayimani

Ifanele ikhonkrithi,stone,asphalt njl

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Ubukhulu

ubukhulu2

iingenelo

1.Ezi bits ngokwesiqhelo zenziwe ngezinto ezahlukeneyo ezifana nedayimani, ibrasive, okanye indibaniselwano yazo zombini.Iibhithi zedayimani ziyaziwa ngokusebenza kwazo okuphezulu kunye nokuqina kwaye zifanelekile ukusika izinto ezinzima ezifana nekhonkrithi, i-masonry kunye nelitye.Iidiski ze-abrasive zidla ngokusetyenziselwa ukusika izinto ezithambileyo.

I-2.Ubume kunye noyilo lwe-blade ludlala indima ebalulekileyo ekunqumeni isantya sokusika, ukuchaneka, kunye nokukwazi ukutshabalalisa ukushisa ngexesha lokusika.Iimilo ze-bit eziqhelekileyo ziquka i-turbine, i-wave, i-segmented kunye ne-edge eqhubekayo, nganye yenzelwe usetyenziso oluthile lokusika kunye nezixhobo.

3.Ubungakanani bentloko ye-cutter, kubandakanywa ukuphakama kunye nobukhulu, buchaphazela ngokuthe ngqo ubunzulu bokusika kunye nokuzinza kwenkqubo yokusika.Iintloko ezinkulu ziqhele ukusetyenziselwa ukusika umsebenzi onzima, ngelixa iintloko ezincinci zingasetyenziselwa ukusika okucokisekileyo, okuchanekileyo.

I-4.Inkqubo yokudibanisa edibanisa isahlulo se-blade kwi-saw blade okanye i-coring bit ichaphazela amandla kunye nokuzinza kwesixhobo.Amacandelo angadityaniswa kusetyenziswa iindlela ezahlukeneyo zokudibanisa, kubandakanywa i-sintering, i-laser welding okanye i-brazing, nganye inikezela ngeenzuzo ezithile ngokwamandla kunye nokumelana nokushisa.

5.Inombolo kunye nokulungiswa kweebhithi kwi-blade okanye i-coring drill ichaphazela ukusika ukusebenza kakuhle, ukutshatyalaliswa kobushushu kunye nokulula kwesenzo sokusika.Khetha kwiindlela ezahlukeneyo zokucwangcisa, ezifana nezahlulo, eziqhubekayo okanye i-turbine, kuxhomekeke kwiimfuno zakho zokusika kunye nezixhobo ezicutshungulwayo.\

I-6.Ezinye iibhithi zenzelwe iimpawu ezikhethekileyo, ezifana nokukhuselwa kwe-undercut, i-gullets yokususa i-debris esebenzayo, okanye imingxuma yokupholisa ukukhusela ukufudumala ngexesha lemisebenzi yokusika ixesha elide.

I-7.Intloko ye-cutter inokuthi yenzelwe izicelo ezithile zokusika, ezifana nokusika ikhonkrithi, ukusika i-asphalt, ukusika i-tile okanye ukugaya kwizinto ezahlukeneyo, ukuqinisekisa ukusebenza kakuhle kunye nokuphila ixesha elide lomsebenzi othile.

Uvavanyo lweMveliso

INDAWO YEFACTORY

Ngaphambili: Diamond tuck point setyhula isarha Blade

Okulandelayo: Amacandelo ashwabeneyo Idayimani yokuSila iphedi

Igama lemveliso	Saw blade Diameter(mm)	Ubungakanani becandelo(mm)	Inombolo yeCandelo(pcs)	Ubume
ICandelo leDayimane lelitye	300	40×3.2×10(15,20)	21	Imilo engu-B, imilo ka-K, imilo engu-M, uxande, imilo yeSandwich njl
	350	40×3.2×10(15,20)	24
	400	40×3.6×10(15,20)	28
	450	40×4.0×10(15,20)	32
	400	40×3.6×10(15,20)	28
	450	40×4.0×10(15,20)	32
	500	40×4.0×10(15,20)	36
	550	40×4.6×10(15,20)	40
	600	40×4.6×10(15,20)	42
	650	40×5.0×10(15,20)	46
	700	40×5.0×10(15,20)	50
	750	40×5.0×10(15,20)	54
	800	40×5.5×10(15,20)	57
	850	40×5.5×10(15,20)	58
	900	24×7.5×13(15)	64
	1000	24×7.5×13(15)	70
	1200	24×8.0×13(15)	80
	1400	24×8.5×13(15)	92
	1600	24×9.5×13(15)	108
	1800	24x10x13(15)	120
	2000	24x11x13(15)	128
	2200	24x11x13(15)	132
	2500	24×12.5×13(15)	140
	2700	24×12.5×13(15)	140

Ubungakanani benxalenye yedayimani yokomba ongundoqo
Idayamitha yebit engundoqo (mm)	Inkcazo	Ubungakanani becandelo	Inombolo yecandelo	Ukuwelda
51	Izixhobo zokulungisa: qinisa ikhonkrithi Uqhagamshelwano:1 1/4″ UNC;Umgqomo: 450mm	22410	5	Ukuphindaphinda ukuwelda kobhedu
63		24410	6
66			6
76			7
83			8
96			9
102			9
114			10
120		244.210	11
127			11
132			11
152		244.510	12
162			12
180			14
200			16
230			18
254			20
300		24510	25