Ii-HSS Annular Cutters: Ukuchaneka, Ukusebenza Kakuhle, kunye Nokuguquguquka Kokugrumba Ngesinyithi

Iinkcukacha zobugcisa zee-HSS Annular Cutters

Izicucu ze-annular zeShanghai Easydrill zenzelwe ukuqina nokuchaneka. Nantsi inkcazelo yeempawu zazo eziphambili:

• Izinto eziphathekayo: Intsimbi ekhawulezayo (i-HSS) yamanqanaba e-M35/M42, ephuculwe nge-cobalt eyi-5-8% ukuze ikwazi ukumelana nobushushu obuphezulu.
• Iingubo zokwaleka: I-Titanium Nitride (TiN) okanye i-Titanium Aluminium Nitride (TiAlN) yokunciphisa ukungqubana kunye nobomi besixhobo obude.
• Uluhlu lobubanzi: 12mm ukuya kwi-150mm, ilungele iimfuno ezahlukeneyo zobukhulu bemingxuma.
• Ubunzulu boMbane: Ukuya kuthi ga kwi-75mm ngokusika ngakunye, ilungele izinto ezityebileyo.
• Iintlobo zeShank: I-Weldon, imisonto, okanye imicu etshintsha ngokukhawuleza ukuze ihambelane needrill zemagnethi kunye noomatshini be-CNC.
• Iingcebiso zesantya:
  • Intsimbi: 100–200 RPM
  • Yenziwe ngentsimbi eshayinayo: 80–150 RPM
  • I-aluminiyam: 250–300 RPM
• Izixhobo ezihambelanayo: Intsimbi yekhabhoni, intsimbi engatyiwayo, intsimbi ephosiweyo, i-aluminiyamu, kunye nee-alloys ezingezizo iintsimbi.
  

  Ukusetyenziswa kwee-HSS Annular Cutters

  Ezi zixhobo zisebenziseka lula zibaluleke kakhulu kumashishini onke:

  1. Ukwenziwa kwesinyithi: Yenza imingxunya echanekileyo yeebhari zesakhiwo, iipleyiti, kunye nemibhobho.
  2. Ulwakhiwo: Bhoboza imingxunya ye-ankile kwizakhelo zentsimbi kunye nezakhiwo eziqiniswe ngekhonkrithi.
  3. Ukulungiswa kweeMoto: Guqula itshasi, izinto zenjini, okanye iinkqubo zokukhupha umoya ngokufanelekileyo.
  4. Ukuveliswa koomatshini: Velisa imingxunya yebholthi echanekileyo kwiindawo ezinzima zoomatshini.
  5. Ukwakha iinqanawa: Phatha iipleyiti zentsimbi ezityebileyo ngokulula, uqinisekise ukuba zifakelwa izinto ezingangeni manzi.

  ---

  Iingenelo ngaphezu kwee-Drill Bits zeMveli

  Izicucu ze-HSS annular zibonelela ngeenzuzo ezingenakuthelekiswa nanto:

  • Isantya: Ukugrumba ngokukhawuleza kathathu ukuya kahlanu kunee-twist drills ngenxa yokuncipha kwendawo yokudibana.
  • Uchaneko: Fumana imingxunya ecocekileyo, engenamigxobhozo enokumelana okuqinileyo (± 0.1mm).
  • Ukuqina: I-HSS kunye neengubo ezityebileyo ze-cobalt zimelana nobushushu obuphezulu, ziphindaphinda ubomi besixhobo.
  • Ukusebenza kakuhle kwamandla: Iimfuno eziphantsi ze-torque zigcina amandla kwaye zinciphisa ukuguguleka komatshini.
  • Ukusebenza kakuhle kweendleko: Ubomi obude kunye nenkunkuma encinci yezinto eziphathekayo zinciphisa iindleko zexesha elide.